Round filament box for spools

A filamentcase optimized to stand on its own and waste as little space as possible. The lid has a groove for a ring of tpu to form a seal to protect from moisture. You can use humidity sensor from makersupply (XF001), or use the dummy supplied. Use a rubberband as a gasket for the dummy.The TPU sealing ring is not a printable item. You can use raw tpu filament and secure it through the hole in groove. See example in the picture gallery.Also included is a wall mount. The holes in the wallmount are 48 mm apart and matches pegboards that have 12mm space between the holes.Works very well with the dessicant box by “gdrag”. The boxes have held a very stable humidity under 20% for over a month in a room at 50% humidty when using the dessicant box. The seal is not perfect, so the dessicant needs to be replaced after a couple of months.