Rover NeoPixel Holder

If you want to make your own Rover NeoPixel Holder you can 3D print the STL file, or use the SVG file to laser cut a single piece of 6mm acrylic or two pieces of 3mm acrylic. This file can be printed on a standard FFF (Fused Filament Fabrication) desktop printer without support.The piece in the SVG file should be 81.225mm wide and 40mm tall. If it gets resized by your software proportionally scale to match that size.Check out the guide for usage: https://learn.browndoggadgets.com/Guide/Addressable+RGB+LED+Strip/539Assembly HardwareYou will need 2 screws as well as 2 matching hex nuts to secure the NeoPixel strip to the NeoPixel Holder.You will also need 2 L3G0 Technic Pins to mount the NeoPixel Holder onto the Rover.3mm Hardware2 x Metric machine screws, Phillips pan head, Zinc plated steel, 3mm x 0.5mm x 10mm2 x Metric hex nuts, Zinc plated class 8.8 steel, 3mm x 0.5mmL3G0 Technic Pins2 x L3G0 Technic Pin with Friction Ridges and Slots (2780 / 61332)