RPI Raspberry Pi 4 Case HQ Camera Mount

This design is for a Raspberry Pi 4 with an assembled aluminium heatsink case and a Raspberry Pi HQ camera. There a two variants available - the difference is that the HQ camera is mounted 180 degrees compared to the other variant. Please either print the *_A or the *_B parts. If there is no "_" then that part is used for both variants.

You can mount this case on a mini tripod or on a microscope stand as shown in the pictures. Besides the printed parts you will need:

* 1x [Raspberry Pi 4](https://buyzero.de/products/raspberry-pi-4b)
* 1x [Raspberry Pi HQ Camera](https://buyzero.de/products/raspberry-pi-hq-kameramodul-hq-camera)
* 1x [Flexcable 20 cm](https://www.ebay.de/itm/271865662841) (25 cm will also work)
* 1x [Aluminium Heatsink Case for Raspberry Pi 4](https://buyzero.de/products/aluminium-kuhlkorper-gehause-fur-raspberry-pi-4-schwarz) ([Pimoroni](https://shop.pimoroni.com/products/aluminium-heatsink-case-for-raspberry-pi-4)/[No Name](https://www.amazon.de/gp/product/B0