RPI4 + x857ssd modulable case

I sometimes end up with the need for some cases, but don't want to make to many versions. So this is my take on a raspberry pi 4 case with a X857 mSATA ssd adapter.

The case comes in 3 versions:
- standard with fan mount
- standard without fan mount
- Nextcloud logo and fan mount

for the right side you have 2 options:
- standard
- ssd1306 oled display mount

There's a USB-Adapter cover that you can tape with double sided tape to the adapter so you don't have the bare soldered pins.

The case is designed to OEM screws, but you will still need x8 2x10mm flathead self tapping screws. They're cheap on amazon (about 8$ for 500 pcs) and I strongly suggest having some spare for any other 3d printed stuff.

I use the case with a raspberry fan that is controlled by temperature (you can find a howto here: https://howchoo.com/g/ote2mjkzzta/control-raspberry-pi-fan-temperature-python ). You need to modify the fan with a 2N2222 transistor and a resistor though.

If you don't want