Thingiverse

Ryobi Angle Grinder Handle

door austin3dprinting

49 Downloads

27 Likes

1 Makes

This is another Handle for the 8mm screw Ryobi Angle Grinder. I used an M8 (8.125) X 30mm hex head and lock nut (for extra torque strength). This design is a tight fit so I used a screwdriver and hammer to tap the screw down through the handle and even used a soldering iron and heat gun at the same time to push the screw through. I printed this in ABS (known for shrinking slightly) so your mileage may vary, PLA you should be fine, ABS maybe scale up ~.05%. Happy Printing!

Bron

Thingiverse

Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid

Eendelig Hardware nodig

Supports 1/3

Montage 0/3

Instellingen 1/3

Bedgrootte 0/3

Nabewerking 1/3

Printer

FDM / FFF

Bestandsformaat