Thingiverse
Ryobi Link Dividers
by RegularGuyTy
53
Downloads
63
Likes
0
Makes
Ryobi doesn't make dividers for their Link line for some reason, so I made some.
As my printer wasn't large enough to print the full depth or width I made a center post to fit the dividers into. It needs at least 2 opposing pieces, but does NOT need 3 nor 4 pieces to be steady.
NOTE: The dividers, center post, and side cutouts all taper. It is important to respect the taper angle and install the dividers and center post in the correct orientation.
The file names indicate the overall length of the dividers, so you can see if they will fit your printers.
Other than infill as you desire I only recommend a brim so that the walls don't topple
As my printer wasn't large enough to print the full depth or width I made a center post to fit the dividers into. It needs at least 2 opposing pieces, but does NOT need 3 nor 4 pieces to be steady.
NOTE: The dividers, center post, and side cutouts all taper. It is important to respect the taper angle and install the dividers and center post in the correct orientation.
The file names indicate the overall length of the dividers, so you can see if they will fit your printers.
Other than infill as you desire I only recommend a brim so that the walls don't topple
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!