Ryomen Sukuna - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 220x123.75mm in size.You may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 2 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Jade WhiteBorder Only Colors from here until the end. At layer #13 (1.12mm) swap to Jade White for the rest.