Ryuk Hueforge

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 352.37x197.32mm in sizeYou may print at higher layer heights below the Min Depth of 1mmThe Max Depth is 2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #29 (1.28mm) swap to Jade White for the rest. If you get the message with the floating regions when slicing... you can ignore this If you want to resize, scale only x and y. Z must stay as it is