【磐岩宇宙】巅峰动力临近感应式纸巾盒 S.R.U Tissue Box

“听到机甲引擎的轰鸣就代表我来了。”   之前MW有个纸巾盒比赛，没什么想法，就没有参加，后面紧接着MO也搞个一模一样的……好好好 退一步越想越亏，忍一时悔不当初！！！ 马上弄！今天就要弄出来！！   这是不是机甲佬的心头好？ 仍然是SRU磐岩宇宙风格（借鉴了我自己的巅峰动力LF-1前哨站的发射区，这里的LP-01是1号发射口的意思） 采用模块化设计，四面装饰板都是可替换的（当然，由于材料收缩原因可能需要胶水来固定他，推荐油性原胶） 盖子和主体是通过磁吸连接的，需要6*2mm圆形磁铁8个 有两种功能： 可完美适配小号抽纸 可作为个性化收纳盒使用（我甚至做了一个四宫格格栅，详见打印配置） 【2025.4.20更新】：史诗级更新——超声波感应模块！ 可以非常炫酷的显示室内温度湿度 通过新的磁吸接驳装置连接在纸巾盒侧面（也可以单独作为摆件） 利用超声波测距原理，在纸巾盒正面10cm内挥手即可激活屏幕并持续8秒 需要一块Arduino UNO开发板 需要杜邦线若干【公口-母口型，约15条】 需要电烙铁及相关锡焊配件 需要DHT11温湿度模块 需要SR04超声波测距模块 需要1602A液晶屏（不是IIC型，是16个针脚那种） 需要Arduino IDE开发软件（代码我给你敲好了，看文档1） 需要准确接线（看文档2） The roar of the mecha engine means I'm here. There was a tissue box competition in MW before. I didn't have any ideas, so I didn't participate. Later, MO held exactly the same one right after that... Fine, fine. The more I think about it, the more I feel it's a loss if I take a step back, and I deeply regret it when I endure for a moment!!! I'll make it right away! I'm going to finish it today!!! Is this something that mecha enthusiasts will love? It's still in the style of the SRU（Solidrock Universe，It draws on the launch area of my own Summit Dynamics LF-1 Outpost. Here, LP-01 means Launch Port 1) It adopts a modular design, and the decorative panels on all four sides are replaceable. (Of course, due to the shrinkage of the materials, glue may be needed to fix them. The original oil-based glue is recommended.) The lid and the main body are connected by magnetic attraction, and 8 circular magnets with a size of 6*2mm are required. It has two functions: It can perfectly fit small-sized facial tissues. It can be used as a personalized storage box. (I even made a four-grid grille. For details, please refer to the printing configuration.) 【2025.4.20 Update】Epic Update – Ultrasonic Sensing Module! Stylishly displays indoor temperature and humidity. Attaches to the side of the tissue box via a new magnetic connector (can also be used independently as a decorative piece). Uses ultrasonic ranging principle: wave your hand