Thingiverse
S10 Endstop Tower
door cilione
3
Downloads
5
Likes
0
Makes
For use with [DollaTek-style](https://www.amazon.de/-/en/DollaTek-Horizontal-Mechanical-Switch-Printer/dp/B08HQB1VL3/) endstops.
Mount in the corner nearest the box with the electronics.
Recommended/mandatory GBRL parameters.
$22=1
$23=2
$24=75.
$25=1000.
Check [Melvins awesome wiki](https://wiki.the-iskens.com/documentation/extras/limit-switches/) for more info.
Endstops are mounted with short M3-bolts (e.g. M3x8).
The holes are tapered, I´d recommend putting a M3-tap through the holes altough it might be possible to force the M3 bolts directly into the holes.
The tower is mounted to the frame using short M5-bolts.
I´ve printed and used "Dist.stl" since my bolts were too long, it´s a spacer made for M5-bolts.
Remember to use eye protection while lasering!
Mount in the corner nearest the box with the electronics.
Recommended/mandatory GBRL parameters.
$22=1
$23=2
$24=75.
$25=1000.
Check [Melvins awesome wiki](https://wiki.the-iskens.com/documentation/extras/limit-switches/) for more info.
Endstops are mounted with short M3-bolts (e.g. M3x8).
The holes are tapered, I´d recommend putting a M3-tap through the holes altough it might be possible to force the M3 bolts directly into the holes.
The tower is mounted to the frame using short M5-bolts.
I´ve printed and used "Dist.stl" since my bolts were too long, it´s a spacer made for M5-bolts.
Remember to use eye protection while lasering!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
