MakerWorld
Hueforge & Lithophane
Model downloaden
Sabrina Hueforge
0
Downloads
3
Likes
0
Makes
Sabrina/Witch Hueforge → 2 Colors Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size - for A1 Mini, select the Printprofile - you can also scale it down if you want!You may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 1.84mm and the Actual Thickness is 1.84mm Filaments Used:→ PLA BambuLab Basic Black, Transmission Distance: 0.6→ PLA SUNLU Silk+ Dual Black/Gold Transmission Distance: 5 → (For the second color, use any you want! White/Glow in the Dark/Gold/Red….)This print uses 2 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to White/Gold/Any other Color for the rest. Hope you enjoy! Thank you! Also don't forget to post pictures after you printed this Hueforge :)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
