Sailboat bookmark

A classic sailboat patterned bookmark, printed with four colours in HueForge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 64.04x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA Eureka Ghost White Transmission Distance: 3This print uses 4 unique filamentsSwap Instructions: Start with Blue At layer #7 (0.64mm) swap to Yellow At layer #16 (1.36mm) swap to Silver At layer #17 (1.44mm) swap to Ghost White for the rest.