Sailoor Moon Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA Smart Recycled Dark Blue Transmission Distance: 0.5PLA Smart Recycled White Transmission Distance: 5.7PLA Smart Recycled Silver/Gray Transmission Distance: 0.5PLA Smart Recycled Red Transmission Distance: 4.4PLA Smart Recycled Orange Transmission Distance: 5.7PLA Smart Recycled Yellow Transmission Distance: 9.3 This print uses 6 unique filaments Swap Instructions:Start with Dark BlueAt layer #11 (0.96mm) swap to WhiteAt layer #12 (1.04mm) swap to Silver/GrayAt layer #13 (1.12mm) swap to RedAt layer #14 (1.2mm) swap to OrangeAt layer #16 (1.36mm) swap to YellowAt layer #17 (1.44mm) swap to White for the rest.