Thingiverse
Sainsmart 9" LCD mount
door electronlove
55
Downloads
50
Likes
0
Makes
LCD enclosure and mount for the Sainsmart 9" LCD.
http://www.sainsmart.com/sainsmart-hdmi-vga-digital-9-9-inch-1024x600-lcd-driver-board-for-raspberry-pi.html
Bezel mounts to the bottom with 8 M3-0.5 x 16 mm fasteners (either machine screws or button socket cap screws). Requires 3 mm tap for bottom mount. LCD driver, touch screen, and keypad are secured by 8 M3-0.5 x 5 mm screws. Driver board secured through back by M2 screws. On smaller format printers (e.g. 200 x 200 x 200 mm), the bottom mount is split. Back connector panel is secured by 2 M3-0.5 x 5 mm screws. Standard 75 x 75 and 100 x 100 mm VESA mount on back with 4 M4-0.7 x screws.
12/10/17 I added a VESA mount adapter to act as a standoff for mounting a VESA articulating arm. See https://www.thingiverse.com/thing:216329
http://www.sainsmart.com/sainsmart-hdmi-vga-digital-9-9-inch-1024x600-lcd-driver-board-for-raspberry-pi.html
Bezel mounts to the bottom with 8 M3-0.5 x 16 mm fasteners (either machine screws or button socket cap screws). Requires 3 mm tap for bottom mount. LCD driver, touch screen, and keypad are secured by 8 M3-0.5 x 5 mm screws. Driver board secured through back by M2 screws. On smaller format printers (e.g. 200 x 200 x 200 mm), the bottom mount is split. Back connector panel is secured by 2 M3-0.5 x 5 mm screws. Standard 75 x 75 and 100 x 100 mm VESA mount on back with 4 M4-0.7 x screws.
12/10/17 I added a VESA mount adapter to act as a standoff for mounting a VESA articulating arm. See https://www.thingiverse.com/thing:216329
electronlove publiceert ook op
28 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
