Saint Pug

Project: halo pugPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Orange At layer #11 (0.96mm) swap to Brown At layer #14 (1.2mm) swap to Beige for the rest.