Sakamoto Days Hueforge

Project: Sakamoto Days.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 158.82x235mm in size You may print at higher layer heights below the Min Depth of 0.48mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 5.5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Jade White At layer #11 (0.96mm) swap to Red At layer #15 (1.28mm) swap to Jade White At layer #19 (1.6mm) swap to Yellow At layer #23 (1.92mm) swap to Jade White Border Only Colors from here until the end. At layer #27 (2.24mm) swap to Red for the rest.