Sakura CardCaptor Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 169.04x441mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Pink Transmission Distance: 8 PLA PolyLite White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Pink At layer #23 (1.92mm) swap to White for the rest.