Sakura no Samurai - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 111.63x200mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:    PLA+ Sunlu Black Transmission Distance: 0.6    PLA+ Esun Dark Blue Transmission Distance: 2    PLA BambuLab Basic Pink Transmission Distance: 8    PLA+ Sunlu Beige Transmission Distance: 7.6 This print uses 4 unique filaments Swap Instructions:    Start with Black    At layer #8 (0.72mm) swap to Dark Blue    At layer #12 (1.04mm) swap to Pink    At layer #19 (1.6mm) swap to Beige for the rest.