Sakura Samurai [Framed] - Bookmark

If you want to sell prints of this model, as well as all of my models - future and past Subscribe to My Patreon: C3D | 3D Models | Patreon Sakura Samurai [Framed] 🌸⚔️   A framed bookmark design featuring a lone samurai beneath blooming Sakura branches. The contrast between the dark silhouette and vivid blossoms gives it a calm but powerful presence, making it a beautiful choice for readers who love artistic and Japanese inspired designs.   Maker notes: While the included profiles are carefully optimized for a 0.4 mm nozzle to retain detail across different settings, this model is still best printed with a 0.2 mm nozzle for the sharpest ribs, phalanges, and frame curls 🧩🖨️   Make sure to clean the build plate with dishwashing soap and warm water before printing. Handwashing soaps should never be used to clean build plates because moisturizers can harm adhesion 🧼💧     USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.   Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Jayo Matte White Transmission Distance: 3.8 / Amazon PLA KINGROON Black Transmission Distance: 0.4 / Amazon PLA Jayo Meta Gray Transmission Distance: 2.1 / Amazon PLA BambuLab Hot Pink Transmission Distance: 3.6 Color Pallete: Swap Instructions: Start with Matte White     At layer #5 (0.49mm) swap to Black     At layer #8 (0.73mm) swap to Meta Gray     At layer #11 (0.97mm) swap to Matte White     At layer #16 (1.37mm) swap to Hot Pink     At layer #20 (1.69mm) swap to Matte White for the rest.