Sam Elliott

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 156.46x200mm in size You may print at higher layer heights below the Base Thickness of 0.56mm The Max allowed Thickness is 3.6mm and the Actual Thickness is 1.92mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6 #9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Dark Gray At layer #13 (1.12mm) swap to Ash Gray At layer #17 (1.44mm) swap to Jade White for the rest.