Thingiverse
Samsung Tab A9+ Wall Mount
by trips20
3
Downloads
6
Likes
0
Makes
This is just the holder for a Galaxy Tab A9+.
There are ventilation openings at the top and bottom, and the speakers and buttons remain accessible.
The four rectangular cutouts are designed for magnetic strips, so that a cover can be created and attached later.
The screen is slightly tilted for better usability and to allow room for a charger at the back.
I use a right-angle Delock EASY USB Type-A to USB-C cable connected to a compact wall outlet, which is controlled by a Shelly 1 Mini Gen4.
The battery percentage is monitored via Fully Kiosk Browser, read into Node-RED, and the Shelly switches on at 20% and off again at 80%.
There are ventilation openings at the top and bottom, and the speakers and buttons remain accessible.
The four rectangular cutouts are designed for magnetic strips, so that a cover can be created and attached later.
The screen is slightly tilted for better usability and to allow room for a charger at the back.
I use a right-angle Delock EASY USB Type-A to USB-C cable connected to a compact wall outlet, which is controlled by a Shelly 1 Mini Gen4.
The battery percentage is monitored via Fully Kiosk Browser, read into Node-RED, and the Shelly switches on at 20% and off again at 80%.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
