Samurai Pug Coaster

This is another of my series of Adventure Pug™ themed coasters, created with HueForge. This is designed at 4.07mm thickness and 100mm (4-in) square, but can be scaled up to make it into wall art. Just make sure to uncheck the uniform scale box, and do not scale the z axis at all. Due to the thickness and 100% infill, make sure you have really good adhesion, and turn off the aux fan to minimize the chance of warping. Print settings:0.16mm base layer0.08mm layer heightIroning all top surfaces (25% flow)100% infill9 top shell layers and 0.8mm top shell thickness5mm brim with 0.1mm gapFilaments and color changes (TD values are my own and may not match HueForge defaults)Start with Overture Matte Black (TD 0.1mm)At layer #30 (2.48mm) swap to Overture Matte Red (TD 2.5)At layer #34 (2.8mm) swap to Overture Matte Orange (TD 3.2)At layer #37 (3.04mm) swap to Overture Matte Yellow (TD 3.6)At layer #43 (3.52mm) swap to Overture Matte white (TD 4.0)