Samurai Warrior HueForge with frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 133.03x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.56mmThe Max allowed Thickness is 2.32mm and the Actual Thickness is 1.6mm Filaments Used: #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3 #ff5869 PLA BambuLab Basic Pink Transmission Distance: 8 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #10 (0.88mm) swap to Sky Blue At layer #12 (1.04mm) swap to Black At layer #13 (1.12mm) swap to Pink At layer #15 (1.28mm) swap to Red At layer #17 (1.44mm) swap to Jade White for the rest.