Thingiverse
SanDevices - e6804 Controller PSU Mount
2
Downloads
0
Likes
0
Makes
PSU Mount for SanDevices e6804 Controller
There are 2 versions available.
1) MW LRS 350 - Fits standard Meanwell/Generic PSU's
2) MW LRS 600 - Fits thin Meanwell LRS 600 PSU's
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.
Spacers are designed to fit into the hole on the top of the mount. Your printer tolerance will have to be dialed in, or it may not fi.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
8x - M3 - 12mm bolts/nuts (secure controller to mount)
Links:
e6804 - https://sandevices.com/product/e6804-kit/
MW LRS 350 - https://www.amazon.com/LRS-350-24-Enclosed-Switching-Replacement-Termina
MW LRS 600 - https://www.digikey.com/en/products/detail/mean-well-usa-inc/LRS-600-27/16394232
** Updated Version 2 Design **
There are 2 versions available.
1) MW LRS 350 - Fits standard Meanwell/Generic PSU's
2) MW LRS 600 - Fits thin Meanwell LRS 600 PSU's
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.
Spacers are designed to fit into the hole on the top of the mount. Your printer tolerance will have to be dialed in, or it may not fi.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
8x - M3 - 12mm bolts/nuts (secure controller to mount)
Links:
e6804 - https://sandevices.com/product/e6804-kit/
MW LRS 350 - https://www.amazon.com/LRS-350-24-Enclosed-Switching-Replacement-Termina
MW LRS 600 - https://www.digikey.com/en/products/detail/mean-well-usa-inc/LRS-600-27/16394232
** Updated Version 2 Design **
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
