Slicer Discord
SandPiper“鹬” Nerf Blaster软弹发射器 – 3D-Druckmodell von Thingiverse Thingiverse

SandPiper“鹬” Nerf Blaster软弹发射器

176 Downloads
266 Likes
1 Makes
Zum Modell
Here's the break action pistol alike nerf blaster "SandPiper".
Uses 13mm nerf dart. Suitable for indoor target shooting.
Muzzle velocity reaches about 40m/s when using a 1.5*15*150 spring.
Accuracy not bad, I can easily hit a small target at a distance of 5 meters.
This is the first real break barrel blaster I've made, with a ton of experimental structures inside.
I've never get to a real break barrel airgun, so my design inspiration entirely comes from those pictures and videos, my imagination, and a lot of experiments.
Please let me know if you have difficulties assembling it.
The English version AssemblyInstruction will be upload as soon as I finished its translation.
+++++++++++++++++++++++++++++++++++++++++++
这是中折短手形软弹发射器“鹬”。
发射13mm软弹,适合室内场地打靶玩。
使用1.5*15*150弹簧时,初速约40m/s。
精准度还不错,我可以在5米左右轻松打中小目标。
这是我做的第一把真正意义的中折,它包含了许多实验性的结构。
我从未接触过真正的中折式气枪,所以设计这只玩具的结构完全的依靠图片和视频为参考,还有对着外观猜结构,以及多次的实验。
如果发现装不上欢迎来找我问。
Quelle
Thingiverse
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen