SANGOHAN HUEFORGE

by serdalhelvaci

3 Downloads

3 Likes

0 Makes

Download Model

hueforge sangohan Gohan

Project: SANGOHAN HUEFORGEPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 160.61x300mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.6mm and the Actual Depth is 2.6mmFilaments Used: PLA+ RAPIDE Elegoo black Transmission Distance: 0.1 PLA SOVB3D VIOLET ALU Transmission Distance: 1.8 PLA SOVB3D Red Transmission Distance: 3.7 PLA Ender yellow Transmission Distance: 4.7 PLA PolyLite White Transmission Distance: