Slicer Discord
3DSEARCH / Hand Tools / SaniKey [UPDATED]
SaniKey [UPDATED] – 3D printable model from MakerWorld MakerWorld
Hand Tools

SaniKey [UPDATED]

by Vince_Prints · Hand Tools
30 Downloads
2 Likes
13 Makes
Go to Model
Summary[UPDATE]I have added some thickness to load-bearing areas to increase rigidity. Because of this, I was able to create a thinner profile that takes ~10 minutes LESS to print!Here is a design I made for the #NoTouchChallenge.The SaniKey allows you to easily open doors, switch lights, and push buttons without contaminating your hands!Print SettingsPrinter Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 Infill: 10Notes: Print with at least 3 perimeters.
Category
Hand Tools
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Medium confidence
Why?
no supports
Support-free Single piece Hardware needed
Supports 0/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
50 mm (Small)
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

Vince_Prints also publishes on

27 additional models across 2 more platforms

Thingiverse
16 models
♥ 2,600 ↓ 3,630 ⚒ 39
Printables
11 models
♥ 411 ↓ 2,697 ⚒ 13
Verified by matching model titles across platforms.
Frequently Asked Questions
Which 3D printer is suitable for SaniKey [UPDATED]?
Any FDM printer should handle SaniKey [UPDATED] just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does SaniKey [UPDATED] need supports when printing?
No supports needed for SaniKey [UPDATED] — it's designed to print clean off the bed.
What file format is SaniKey [UPDATED] available in?
SaniKey [UPDATED] is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is SaniKey [UPDATED] free to download?
Yes, SaniKey [UPDATED] is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
door hands free - stirrup design
door hands free - stirrup design
by elfutzi
↓ 7 ♥ 9
No-Touch Door Opener (TurSnail)
No-Touch Door Opener (TurSnail)
by postmoderncapitalism
↓ 2 ♥ 1
SaniKey [UPDATED]
SaniKey [UPDATED]
by Vince_Prints
↓ 22 ♥ 18
Dook
Dook
by rlogiacco
↓ 3 ♥ 3
Door Opener Advance Remix Touch Screen Addon
Door Opener Advance Remix Touch Screen Addon
by jmpierson
↓ 47 ♥ 22
Abre Puertas Door Opener No Touch
Abre Puertas Door Opener No Touch
by 3Dcreaciones
↓ 8 ♥ 6
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection