Santa and deer

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 171.69x242.61mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 1.2mm Filaments Used: PLA Anycubic Black Transmission Distance: 0.6 PLA Anycubic White Transmission Distance: 5 This print uses 2 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Jade White for the rest.