Santa Claus Hueforge

My first time making something—I hope I did everything right. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x184.25mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA+ eSUN Black Transmission Distance: 0.3 PLA Generic Red Transmission Distance: 3.3 PLA+ eSUN Grey Transmission Distance: 1 PLA+ eSUN White Transmission Distance: 8This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #12 (1.04mm) swap to Grey At layer #21 (1.76mm) swap to White for the rest.