Santa Pikachu Hueforge Bookmarks - 2 sizes

Santa Pikachu Hueforge Bookmarks - 2 sizes Large 65mm x 200mm Bookmark Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 65.03x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 3.8mm and the Actual Depth is 3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.1 PLA BambuLab Basic BambuLab Green Transmission Distance: 2.6 PLA PolyLite Wine Red Transmission Distance: 1.7 PLA BambuLab Basic Yellow Transmission Distance: 5.2 PLA BambuLab Basic Light Gray Transmission Distance: 1.4 PLA BambuLab Basic Jade White Transmission Distance: 5.8This print uses 6 unique filaments ***attached .3mf file prints the first 6 layers at 0.16mm then the rest at 0.08mm for faster print time******the layer numbers will be different but the layer height will be the same*** Swap Instructions: Start with Black At layer #16 (1.36mm) swap to BambuLab Green At layer #19 (1.6mm) swap to Wine Red At layer #23 (1.92