MakerWorld
2D Art
Go to Model
Santa tiger - Hueforge
18
Downloads
19
Likes
11
Makes
Santa tiger - ready for christmasPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.64mm and the Actual Thickness is 2.08mm IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHTFilaments Used: #c12e1f * PLA BambuLab Basic Red Transmission Distance: 3.8 #000000 * PLA Sun lu Black Transmission Distance: 0.1 #ffffff * PLA sun lu white Transmission Distance: 6.8 #8e9089 * PLA BambuLab Basic Gray Transmission Distance: 0.2This print uses 4 unique filamentsSwap Instructions: Start with BambuLab Basic Red At layer #10 (0.88mm) swap to Sun lu Black At layer #11 (0.96mm) swap to sun lu white At layer #15 (1.28mm) swap to BambuLab Basic Gray At layer #18 (1.52mm) swap to sunlu white for the rest.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
