Sapphire pro enclosure

Update 13.02.2023
"Panels cut layout_V1" for the version with one door and extruder outside the printer added to the archive "Panels_dxf_13.02.2023.zip"
Engraving added on the both layouts, I've engraved with 0.3 mm deep, you can still cut the panels without engraving, just ignore it.
Old archive is kept for the history.

Update 16.05.2021
1) After assembling the cover were a bit wiggle. I solved this problem by simply drilling 2 holes on each panel and attached them to each other by zipties (see image).
2) Concerning only for fully enclosed version. I've attached PTFE tube to the stepper motor which caused the overheat of the filament inside of the tube after 1h of printing and plastic were jamed. I solved that problem by moving the extruder a bit away from stepper motor and that solved my problem (see image). "Extruder extender.stl" part uploaded.

This is reworked version of the design made by quentinDeroo
https://github.com/quentinDeroo/Sapphire-pro-enclosure

Mainly I