Thingiverse
Sapphire Pro/Plus Direct Drive
par 8jack
96
Téléchargements
70
Likes
0
Makes
The mod is for the default Hotend.
I want to use the push fitting on outside from the extruder so i made an slightly higher base and not to much waste material.
Information for installing:
Use 4x M3 8mm screws, the original is to short
The bowden between Hotend and Extruder is ~93 mm if you use an full metal heatbreak like me.
If you use the PTFE default heatbreak add 18mm to the above.
I want to use the push fitting on outside from the extruder so i made an slightly higher base and not to much waste material.
Information for installing:
Use 4x M3 8mm screws, the original is to short
The bowden between Hotend and Extruder is ~93 mm if you use an full metal heatbreak like me.
If you use the PTFE default heatbreak add 18mm to the above.
8jack publie également sur
30 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
