Sasquatch Hueforge Bookmark

Project: sasquatch bookmark.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 50x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mmFilaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #154734 PLA Paramount 3D British Racing Green Transmission Distance: 3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #e5c8a2 PLA PolyLite Cream Transmission Distance: 2 #5aabb1 PLA PolyTerra Arctic Teal Transmission Distance: 0.5 #e6dede PLA Overture Matte White Transmission Distance: 3.7This print uses 6 unique filamentsSwap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to British Racing Green At layer #12 (1.04mm) swap to Blue Gray At layer #13 (1.12mm) swap to Cream At layer #15 (1.28mm) swap to Arctic Teal At layer #16 (1.36mm) swap to White for the rest.