Sauron: Hueforge

A Hueforge print of one of my favourite characters in The Lord of the Rings trilogy. Project: SAURON.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the minimum depth of 0.24mmThe maximum depth is 2mm and the Actual Depth is 1.8mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Blue Gray At layer #11 (0.96mm) swap to Ash Gray At layer #17 (1.44mm) swap to Ivory White for the rest.