Sauron Logo Hueforge

Here's another Tolkien themed Hueforge print:This time its the sigil / logo depicting The Dark Lord himself, Sauron Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.24mm The Max Depth is 2mm and the Actual Depth is 2mm Filaments Used:PLA BambuLab Matte Charcoal Transmission Distance: 0.6PLA BambuLab Matte Scarlet Red Transmission Distance: 2PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filaments Swap Instructions:Start with CharcoalAt layer #6 (0.56mm) swap to Scarlet RedAt layer #11 (0.96mm) swap to OrangeAt layer #18 (1.52mm) swap to Yellow for the rest.