Save or get Coin pusher

save or get


The new coin pusher machine that allows you to save or win money is very easy to print and assemble.
If a coin falls after insertion directly into a gap of the coin pusher it is saved. If the coin does not fall into the gap you can win a lot more :-)


No supports are needed anywhere for printing.

Print all parts lying flat!

I have printed everything with:
PLA 220 °C
Resolution 0,2
Infill 5%
1 layer speed: 40mm/s
Rest: 75mm/s

Printing time complett: 27h
PLA consumption 610g

Instruction:

1. Print all parts

2. Screw the switch button into the hole on the front side of the base body

3. Screw the push rod with the countersunk screw on the gear disk but leave a gap of about 2mm so that it can move easily

4. Screw the other side of the push rod for example with a cylinder head screw to the coin slide but leave a gap of about 2mm so that it can move easily.

5. Now put the gear motor on the gear plate opposite to the