Scaleable Tree Support Marble Run - Figure 8 Style

Introducing the Figure 8 Tree Support Marble Run!If you’re looking for a challenge you have found the right place! But brace yourself, this print takes quite some time as it will fill your build plate. **Pictured model is scaled down to 47% for use with 6mm marbles CompatibilityThis marble run was modeled using a 15mm steel ball with the track trenches at 16mm. With that said, this model is completely scalable below 100% so you are free to resize to accommodate any marble size below 15mm! (If you have a large build plate you can go bigger!)Print SettingsI have attached a screenshot of the settings I used for supports in Bambu Studio (based from PrusaSlicer). With that said, you may need to adjust settings depending on your preferred slicer. *Edit (5/20/23)Top interface spacing can be set to 0.0mm to help strengthen support connections as they won’t be removed!Max bridge Length will vary the support structure under the model, I recommend a 10mm or smaller depending on scale!*Important n