Thingiverse
Scaramanga Knife
par seventhsky
36
Téléchargements
22
Likes
1
Makes
– only one thing to print
– no support required
– no screws required
– for 60x19mm trapezoidal blades
– can be used as key chain
How to release the blade...
Due to the 0.6mm gap, you can easily spread the case with your thumb and pull/release the blade.
Important...
Due to the inner life, the case is to be printed in standing position. Depending on your printer quality, you might have to gently crack/cut the gap apart.
Positions...
0 = locked (stowed)
1 = small blade
2 = bigger blade
3 = replacement
– no support required
– no screws required
– for 60x19mm trapezoidal blades
– can be used as key chain
How to release the blade...
Due to the 0.6mm gap, you can easily spread the case with your thumb and pull/release the blade.
Important...
Due to the inner life, the case is to be printed in standing position. Depending on your printer quality, you might have to gently crack/cut the gap apart.
Positions...
0 = locked (stowed)
1 = small blade
2 = bigger blade
3 = replacement
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
