Scarlet Spider Hueforge

This is a variant cover by Mark Bagley of Scarlet Spider #1 from 2012. I just liked the cover and wanted to make it a Hueforge. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 131.33x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 2.3mm and the Actual Depth is 1.6mmFilaments Used: PLA PolyLite White Transmission Distance: 4.5 PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Gray Transmission Distance: 7.6 PLA BambuLab Basic Red Transmission Distance: 0.5This print uses 4 unique filamentsSwap Instructions: Start with White At layer #16 (0.76mm) swap to Black At layer #21 (0.96mm) swap to Gray At layer #34 (1.48mm) swap to Red for the rest.