Slicer Discord
Schmid Grid, 5 x 10 – 3D-printbaar model van Thingiverse Thingiverse

Schmid Grid, 5 x 10

5 Downloads
8 Likes
0 Makes
Model downloaden
A thin, flexible grid that can be taped down as a masking tool when practicing paint mixing.

260.35 x 133.35 mm, 1mm height.
(10.25" x 5.25", )

Squares are 1", divided by 1/4" (0.25") borders.

Spacing is derived from the instructions for masking out a grid to do the paint mixing exercise described by Richard Schmid in "Alla Prima: Everything I Know About Painting". Rather than go through the trouble of drawing and taping a grid, I thought it might be valuable to have a re-useable grid that I can tape down while working and then peel away when done.

I expect that this will be most useful for paints that sit on top of the surface rather than sink in, i.e. gouache, oil, acrylic. I plan to test it for watercolour as well, but I don't have high hopes.

If you are not familiar with this exercise or the book, it is described in this blog post. https://michaellynnadams.com/color-chart-exercise/

I printed it with a 0.4mm nozzle, 0.2mm layer height, on an Elegoo Neptune 4 plus using reg
Bron
Thingiverse
Wat je nodig hebt om te printen: Gemiddeld Lage betrouwbaarheid
Waarom?
0.20mm lagen
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Laaghoogte
0.2 mm
Nabewerking
Schilderen
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie