Slicer Discord
3DSEARCH / Terrain / Sci-Fi Base Vol. 01 SAMPLE
Sci-Fi Base Vol. 01 SAMPLE – 3D printable model from MyMiniFactory MyMiniFactory
Terrain

Sci-Fi Base Vol. 01 SAMPLE

by Oliver Schümann · Terrain
0 Downloads
1 Likes
0 Makes
Go to Model
Hand-picked collection of free samples based on the complete Sci-Fi Base Vol.01 Packages. Every base is easy to print and fun to paint with enough room for additional base bits.   Each model was tested on an Anycubic Photon MonoX. The resolution can vary based on your used SLA printer and settings.
miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported miniature 3dprint base 40mm 32mm 25mm supported
Category
Terrain
Source
MyMiniFactory
Published
What you need to print this: Intermediate Medium confidence
Why?
supports needed
Single piece Supports required
Supports 2/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
50 mm (Small)
Post-processing
Painting
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Sci-Fi Base Vol. 01 SAMPLE?
Any FDM printer should handle Sci-Fi Base Vol. 01 SAMPLE just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does Sci-Fi Base Vol. 01 SAMPLE need supports when printing?
Yes, Sci-Fi Base Vol. 01 SAMPLE will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.
What file format is Sci-Fi Base Vol. 01 SAMPLE available in?
Sci-Fi Base Vol. 01 SAMPLE is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MyMiniFactory.
Is Sci-Fi Base Vol. 01 SAMPLE free to download?
Yes, Sci-Fi Base Vol. 01 SAMPLE is available as a free download through MyMiniFactory. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Eagle statue
Eagle statue
by 3d tisk - Sam
↓ 681 ♥ 64
Steampunk eagle
Steampunk eagle
by 3d tisk - Sam
↓ 67 ♥ 11
Mira 32mm /Wasteland Wars/
Mira 32mm /Wasteland Wars/
by Haito
♥ 6
Buster Bunny - Multicolor Print
Buster Bunny - Multicolor Print
by DeadMoon
↓ 72 ♥ 11
Sci-Fi Base Vol. 01 50mm
Sci-Fi Base Vol. 01 50mm
by Oliver Schümann
[Death Titan Rises] NSFW Necromancer Ritual Gothic Diorama for Painters (120mm Scale STL)
[Death Titan Rises] NSFW Necromancer Ritual Gothic Diorama for Painters (120mm Scale STL)
by Secret Forge
♥ 9
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection