Sci-Fi Color Swatch Case, a modular sci-fi-inspired color swatch holder

v1版本组装需要胶水，额外提供了v2版本给不想使用胶水进行组装的人可容纳最多11个色卡Textured Color Swatch 有纹理的色卡 来自 云端的风 - MakerWorldThe v1 version requires glue for assembly, and an additional v2 version is provided for those who do not want to use glue for assemblyCan accommodate up to 11 color swatch。注意***柱子推荐使用花瓶模式单独打印，但您也可以使用0层顶面、0层底面、1或2层墙、0%填充的设置和其他部分一起打印***下面是一个v1版本简单的组装指南take care***The column is recommended to be printed separately using the vase mode, but you can also print it with the settings of 0 layer top, 0 layer bottom, 1 or 2 layers of walls, 0% fill, and other parts together***Here is a simple assembly guide for v1 version1、所有需要的零件为防止打印失败以及方便组装，建议打印时给打印版涂胶，而不是使用裙边1. All required partsTo prevent printing failure and facilitate assembly, it is recommended to apply glue to the printed version instead of using a skirt when printing 2、组装外框和顶面使用瞬干胶进行粘接2. Assemble the outer frame and top surfaceUse instant adhesive for bonding,3、组装框架和柱子定位后将柱子和单侧框架使用瞬干胶进行粘接，注意只需要将柱子粘在一侧，另一侧无需粘接3. Assembling frames and columnsAfter