Scream 1 - hueforge

Hueforge of Scream 1The photos shows the result in 150x200mm and a nozzle of 0.4Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLAHueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 150x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 2.56mm and the Actual Thickness is 1.72mm Filaments Used: #00358e PLA BambuLab Basic Blue Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6This print uses 3 unique filaments Swap Instructions: Start with Blue At layer #17 (0.84mm) swap to Jade White At layer #24 (1