Scream Mask Hueforge

Please change the orientation of this before slicing if using Bambu as it will print over the test lines and cause an error. So rotate 90 degrees. This is my first time creating one of these. Hope to make more in the future. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 140.94x250.56mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Sunlu Meta Grey Transmission Distance: 3.5 PLA Sunlu Matte White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Grey At layer #12 (1.04mm) swap to White for the rest.