Screaming Heart - Hueforge

Screaming Heart Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 154.52x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Jade White Transmission Distance: 6This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #12 (1.04mm) swap to Beige At layer #18 (1.52mm) swap to White for the rest.