Thingiverse

Screw Tolerance Test Kit + STEP FILE

por micahjj

18 Descargas

18 Likes

0 Makes

# Screw Tolerance Tester
Test how tight your tolerances are for screws. Can test from 0.0 - 0.2.

The screws and nuts are M10 1.5.

# Update 22 February 2022
Added a second generation of files, the originals text was too small to print . The G2 pieces are slightly bigger and take a little longer to print ( by minutes) but you can see what the tolerance that has been applied to each piece.

## Guide to Models

### Screws
Print one or both..

Screw - 0.1mm Tolerance
Screw - 0.0 Tolerance

### NutPlates
You can either print the 5 in 1 test, or the individual torances you require. I think the 5-in-1 is a good place to start, then you can print the individual nutplates as you callibrate your machine.

NutPlate - 0.0 - 0.10 Tolerances
Nut- 0.0
Nut - 0.0125
Nut - 0.025
Nut - 0.05
Nut - 0.10

## Tolerances
A tolerance has been applied to each of the 4 faces of a screw and also the threads. The total tolerance will be the sum of the tolerance on the screw + the

10mm callibration check CR-10 Creality Ender fusion360 fusion 360 ISO metric printer printer calibration prusa screw STEP step file step files test tolerance tolerances 10mm callibration check CR-10 Creality Ender fusion360 fusion 360 ISO metric printer printer calibration prusa screw STEP step file step files test tolerance tolerances

Fuente

Thingiverse

Lo que necesitas para imprimir: Intermedio Baja confianza

Pieza única Tornillería requerida

Soportes 1/3

Ensamblaje 0/3

Ajustes 1/3

Tamaño de cama 0/3

Postproceso 1/3

Impresora

FDM / FFF

Formato de archivo