Thingiverse
Sculpfun S10 Endstop Brackets
door MB001
16
Downloads
7
Likes
0
Makes
These brackets were designed to add adjustable endstops to the existing mounting holes of the Sculpfun S10 Diode Laser.
I used the following universal 20.5mm x 20.5mm switches:
https://www.aliexpress.com/item/1005004296119709.html
as well as 3x M5 screws that were provided as spare screws with the S10.
After placing the endstops onto the printed bracket, I used a heated blade to melt the 3 holding pins and lock the endstop switch in place, without the need for additional screws. Cut the solder pins on the backside of the switch shorter if you like a more snug fit.
I used the following universal 20.5mm x 20.5mm switches:
https://www.aliexpress.com/item/1005004296119709.html
as well as 3x M5 screws that were provided as spare screws with the S10.
After placing the endstops onto the printed bracket, I used a heated blade to melt the 3 holding pins and lock the endstop switch in place, without the need for additional screws. Cut the solder pins on the backside of the switch shorter if you like a more snug fit.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
