SCX24 RTI Ramp (Quick Printing version)

I redesigned the basic RTI ramp so that the 200mm long ramp can be printed in much less than 2 hours even with different color letters/numbers.

- This ramp has a __20 degree__ incline.
- Accuracy is within __(+/-) 1mm__.
- Supports may be required for the very tip of the __ramp__. All others can be printed without supports.
- Put together in this order (glue is not necessary, but it's up to you):
- - Print the __base__ first.
- - Print and insert the __bars__ into the base *note the angled top of the short bars, the shorter side of the part goes toward the base cutout, please check the images for proper orientation*
- - Print and insert the __ramp__ into the base cutout and align the top ramp insertion points with the bars and press it down firmly.
- - Slide the __side numbers/measurement bars__ piece into the assembly (at a slight angle so the bars can slide past the cutouts on the side of the ramp) and then press the tops of the __side numbers/measurement bars__ into the cutouts i