Thingiverse
SCX24 shock
par marco_ul
141
Téléchargements
83
Likes
0
Makes
Shock absorber with longer displacement for the AXIAL SCX24.
Designed for 1.2mm piano wire and original springs. Shaft should be 22mm long and glued to piston and eyelet (thus cannot be disassembled. Make sure to put the pieces together in the right order!).
The piston does not slide as freely as the stock shocks. Adding a little bit of sewing machine oil helps, but they still lock up. I think this would work better on a resin 3D printer.
Designed for 1.2mm piano wire and original springs. Shaft should be 22mm long and glued to piston and eyelet (thus cannot be disassembled. Make sure to put the pieces together in the right order!).
The piston does not slide as freely as the stock shocks. Adding a little bit of sewing machine oil helps, but they still lock up. I think this would work better on a resin 3D printer.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
